==============================================================
MVR-64 multiverter Change Log (History)
==============================================================

V3.2 (2018-10-02)
=================

- UI:       Fixed web remote control when *no* ASRC is installed (was almost unsuable)

- UI:       Many improvements for the Routing Matrix on Web Remote:
            - Matrix headers are sticky and don't scroll outside the view
            - Status information for each port (connection status, channel count, format...)
              displayed on the column/row header
            - Unavailable channels (i.e. >48 on AES50) are hatched out
            - Better display of aggregate interfaces (dual-MADI, dual-AES50 for 96k I/O with ASRC)
            - Overall display improvements
        
- Telnet:   Fixed "config" command reply when both parameters "query" and "json" are given        
        
- Updater:  Display a warning that Dante firmware should also be upgraded  
            Improved detection of COM port (added 2018-11-06)
            

V3.1 (2018-07-12)
=================
Bugfix release: Fixed routing via Web UI at 96k/192k


V3.0 (2018-07-03)
=================

- UI:        Web / Telnet / USB / MIDI remote control
             Channel-wise routing

- AES50:     Removed AES50+MADI-TP dual port aggregation. 
             Use channel-wise routing as replacement (much more flexible).
             
- MADI:      Fixed reception of streams containing extra channels
             (i.e. containing DiGiCo control data)
             
- Dante:     Based on Dante Brooklyn Firmware 4.0.9.1

- Selftest:  Fixed +15V output on Extension port during selftest


V2.0 (2017-09-27)
=================

- ASRC:      Support for ASRC (Asynchronous Sample Rate Converter) Hardware Module

- Dante:     Based on Dante Brooklyn Firmware 4.0.4.19, including new features like
             support for "Dante Domain Manager" (DDM)

- Testtone:  Fixed occasionally wrong tone sent after samplerate changed

- UI:        Cursor wrap at the end

- UI:        Improved rotary knob responsiveness 

- All:       Improved and documented selftest features


V1.4 (2017-04-13)
=================

- UI:        New panel lock function: To lock/unlock the panel, press and hold the "Back"
             button (small round button left-top to the encoder) while pushing the encoder. 
             If the panel is locked and a button is pressed, the seven-segment display will 
             flash three times to indicate the lock.

- ADAT:      Fixed ADAT input channel assigment (ch1/2 were missing, data from 7/8
             appeared instead on ch1/2 as well as on 7/8)
             
- Dante:     Fixed occasional corrupted transmit data when clock source is "DA"
	     (supposedly due to a bug in the Brooklyn module)

- MADI:      Fixed very rare init problems after powerup

- Testtone:  Fixed ch1 samples doubled in samplerates >= 88.2kHz
             
             
             
V1.3 (2016-11-18)
=================
- Dante:     Samplerate and clocking now set automatically depending on the multiverter's
             clock setting; no need to set it also within Dante controller
             
- Dante:     Based on Dante Brooklyn Firmware 3.10.1.2, including new features like
             Device Lock etc.
             
- Dante:     Improved clock stability when Dante is master clock
                
- AES50:     Added channel aggregation mode (use MADI-TP as second AES50) to 
             have full 64 channels@48kHz (either 48+16 or 32+32)           
                
- Headphones: Added optional gain (0/+6/+12/+24dB) in configuration settings

- MADI:      Fixed 96k/48k frame setting for coaxial output 
             (setting had no effect, instead setting from optical output was taken)
             
- MADI:      Improved valid signal detection and muting after loss of signal

- UI:        Fixed "SMUX" LED in SMUX mode

- UI:        Changed cursor movement in "Routing" menu to a more natural 
             "I want that input on that output" way.

- UI:        For outputs where the connection is essentially bi-directional
             (Dante, AES50, MADI-TP), the dots in routing matrix are only shown 
             green if both a valid input *and* output connection is detected
             (i.e. a conversion is actively set up and running)
             
- UI:        Altered configuration settings are set back to their initial value
             when the setting mode is exited via "back" button                         
             
- Selftest:  Fixed and improved status indicators for AES50,WCLK,Dante

- Updater:   Improved detection of COM port numbers, improved user guidance           

         

V1.2 (2016-07-05)
=================
- ADAT:   Corrected Rx channel assignment when clock source is ADAT@96k          

- MADI:   Removed silent aliasing noise problems when clock source is MO/MC/MT

- AES50:  Fixed sync and connection with Behringer X32/S16

- AES50:  Fixed sync and connection with MIDAS PRO1 and DL251 in certain
          master/slave scenarios
          
- Dante:  Fixed audio spurious audio receive problems at 96kHz (digital noise)

- Dante:  LEDs are green only when audio is unmuted and there is at least one
          ethernet connection active
          
- Clocks: Added PLL self-reset when samplerate changes to ensure correct
          re-initialization
          
- UI:     Changed Monitor mode default to Mono

- UI:     Limit monitor channel to 32/16 in x2 and x4 modes


V1.1 (2016-06-11)
=================
- UI: Fixed LED indication (red) of changed preset after power cycle

- UI: Testtone mode indication (yellow) removed


V1.0 (2016-05-11)
=================
- Initial Release
