Log in Register

Login to your account

Username *
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name *
Username *
Password *
Verify password *
Email *
Verify email *

multiverter MVR-64

Why choose between digital interfaces when you can have them all?

Here's your swiss knife for all your digital audio needs. This unique piece of hardware is able to convert 64x64 channels between the an impressive selection of digital interfaces - any to any, all at once. 

all protocols

Supported Audio Interfaces
  • ADAT (8x), SPDIF optical*
  • MADI optical
  • MADI coaxial
  • MADI-TP (up to 2 ports)
  • AES50 (up to 2 ports)
  • Dante/AES67
  • and many more via breakout boxes (currently planned: AES3, AVB)
Read more: multiverter MVR-64

ADX-8

bestprice 40 Send ADAT over Cat5, up to 100 meters!

Without any kind of compression or other potentially sound-degrading conversions, the input signal is 100% bitwise transmitted in real time to the output. Ideally suited for connecting your PC to your HiFi equipment, for upgrading your network cabling to a true HiFi-capable sound bridge, or to listen to music in uncompromising quality anywhere you can reach with standard network cabling. Or use the extender in your recording studio to overcome the 5 meter length limit of ADAT connections!

 

Read more: ADX-8

ADS-8

new 40 Active ADAT/Toslink-Splitter & Repeater

The ADS-8 ADAT/Toslink Splitter allows you to connect any signal source to two sinks. The active design overcomes the limitations of traditional passive splitters: They essentially half the amount of light on each output, causing problems because the attenuated signal is too weak for proper transmission of high-speed data. In contrast, the ADS-8 receives the optical signal, converts it to an electrical signal which can be split without loss to the out put transmitters which operate on each port with full power. As a side effect, it acts as signal repeater which doubles the reach of each connection.

Read more: ADS-8

ADX-32B / ADX-64B-PRO

Digital snake, value for money: less than $17/channel!*

Still believe digital multicores are expensive? Or proprietary? Think again....

Use our ADAT Multicore Extenders to connect any number of ADAT compatible equipment with standard Cat5 network cabling. Reaches longer than fiber (330ft/100m), weights less than analog cable (only 1 Cat5 for 32 channels), is cheaper than MADI and more compatible than proprietary systems. The newest generation comes with additional features (like MIDI transmission) which have been often requested by our customers.

Read more: ADX-32B / ADX-64B-PRO

RGC-24A-M

Remote Gain Control for (almost) every preamp!

Digital snake systems like our ADAT Multicore Extender have many advantages. But with these systems, the mic preamps are usually located on stage, and you cannot adjust the gain locally from FOH - this can be an issue if you just wanted to "give some dB less" during the show. Remote controllable preamps are the solution, but they are hard to find and even more expensive - not the right thing when building a low-budget system. That's why we developed a modkit which works with most preamps and allows you to add remote gain control via MIDI. Simple to do, even simpler to use.

Read more: RGC-24A-M

ADX-16

Bidirectional ADAT/TOSLINK Extender Kit

The ADX-16 Kit has been designed to overcome the length limitations (5m/16 ft) of optical TOSLINK® interconnects running ADAT Lightpipe®, S/PDIF® and other protocols. The kit enables you to run two TOSLINK connections (one in each direction) over a single Cat5 cable and up to 100m / 330ft. in length, opening up a range of new possibilities (e.g. for audio distribution within a building).

 

Read more: ADX-16