==============================================================
FLX-AES3SRC Firmware Version History
==============================================================

V3.0 (2025-03-06)
=================
- New option: AES3 clock source line always on first input of AES3 connector (DIP3=down)
- [AUX-ADAT][AUX-ADAT-64][AUX-AES3] New option: clock source line always on first input
  (DIP6=down). The previous function of DIP6 (metadata format) has been removed and is now always 
  "professional" for balanced (AUX-AES3) and "consumer" for optical (AUX-ADAT, AUX-ADAT-64)
- AUX to FlexLink "concat to AES3" vs. "separate lane" moved from DIP3 to DIP7 (up=concat, down=separate)
- Removed seldomly used FlexLink lane remappings; when used check manual for changes
- Fixed web remote sometimes showing incorrect interface status


V2.9 (2025-02-28)
=================
- Fixed invalid signal output on certain input samplerates (88.2kHz), bug present in firmware versions 2.6/2.7
- Changed optional AUX card channel offset (i.e. for daisy-chaining multiple devices with AUX-MADI cards) 
  now in steps of 8ch using DIP 7..9
- Improved tolerance to input glitches  


V2.7 (2024-10-03)
================
- New routing mode AES3 via SRC => AES3 (on same connector) to use device as AES3/AES3 SRC
- Added support for AUX-MADI-TP
- AUX-DANTE: Fixed "Dante Receive" audio occationally not initializing correctly (distorted, channels shifted)
- FlexLink:  Fixed Power LED sometimes going dark although connected


V2.6 (2024-08-13)
=================
- AES3 input samplerate range extended to 32kHz-5%...192kHz+5%
- Improved input jitter tolerance
- New simplified display of version (binary encoded)


V2.5 (2024-07-09)
=================
- [AUX-ADAT][AUX-AES3]: Removed alien receive channels caused by crosstalk


V2.4 (2024-06-03)
=================
- Improved clock init/lock behaviour
- Fixed clock not locking on AUX-MADI-* cards on powerup


V2.3 (2024-05-11)
=================
- Added remote control via webbrowser/USB.  No software required, just 
  connect Flexiverter via USB and open www.appsys.ch/remote
- Added support for AUX-TDM card
- Added DIP option for AUX-DANTE: with DIP4=down the Dante module's configuration
  can externally be set by Dante Controller
- Fixed certain combinations of FLX and AUX only passing uni-directional audio  
- Fixed AUX-ADAT indicator showing "green" even with no signal
- Added support for AUX Testboard


V2.2-Beta1 (2024-04-05)
======================
- Initial release