==============================================================
FLX-AES50 Firmware Version History
==============================================================

V3.0 (2025-03-08)
=================
- Enabled HA remote over audio for both ports A and B (use as dual AES50 over fiber or Dante extender)
- Changed "32(A)+24(B)+Remote(A) <> AUX mode" to "24(A)+Remote(A)+24(B)+Remote(B) <> AUX" mode
- Added optional AUX card channel offset (i.e. for daisy-chaining multiple devices with AUX-MADI cards) 
- [AUX-ADAT][AUX-ADAT-64][AUX-AES3]: Clock source line can now be pinned fixed to the first input
  (DIP6=down). The previous function of DIP6 (metadata format) has been removed and is now always 
  "professional" for balanced (AUX-AES3) and "consumer" for optical (AUX-ADAT, AUX-ADAT-64)
- Fixed interface status not always been displayed properly in web remote 


V2.7 (2024-10-03)
================
- Added support for AUX-MADI-TP
- AUX-DANTE: Fixed "Dante Receive" audio occationally not initializing correctly (distorted, channels shifted)
- FlexLink:  Fixed Power LED sometimes going dark although connected


V2.6 (2024-08-07)
=================
- Support for AES50 AUX-over-audio (channel 57-64).  This enables headamp remote 
  control over standard Dante/MADI/etc. audio connections
- Changed AES50_A+AUX+B <> FLX concatenate mode to AES50_A+B+AUX
- Suppress red LED on unconnected port when other port is working correctly
- New simplified display of version (binary encoded)


V2.5 (2024-07-09)
=================
- [AUX-ADAT][AUX-AES3]: Removed alien receive channels caused by crosstalk


V2.4 (2024-06-03)
=================
- Improved clock init/lock behaviour


V2.3 (2024-05-11)
=================
- Added remote control via webbrowser/USB.  No software required, just 
  connect Flexiverter via USB and open www.appsys.ch/remote
- Added support for AUX-TDM card
- Added DIP option for AUX-DANTE: with DIP4=down the Dante module's configuration
  can externally be set by Dante Controller
- Fixed certain combinations of FLX and AUX only passing uni-directional audio  
- Fixed AUX-ADAT indicator showing "green" even with no signal
- Added support for AUX Testboard


V2.2 (2024-03-08)
=================
- Fixed AUX-MADI-* cards sometimes not starting up properly


V2.1 (2024-01-25)
=================
- Remote control parameters changed to 115200,8N1 / JSON response fixes
- Auto-selection of clock input line on AUX-AES3/AUX-ADAT
- Support for AUX-ADAT-64 card
- Fixed clock source "Internal" not locking after power up
- Fixed remote control data forwarding for blue MIDAS stageboxes (DLxxx)
- Fixed AUX-DANTE not booting up under certain conditions


V2.0 (2023-01-13)
=================
- Remote control via command line over USB (serial port, 57600 8N1)
- FlexLink: Fixed link negotiation with FLX devices running on own clock


V1.3 (2022-09-07)
=================
- FlexLink connection fixes
- Improved reception of jittery ADAT/AES3 streams from AUX cards


V1.2 (2022-06-15)
=================
- Reduced LED brightness for better readability
- FlexLink: Fixed sporadic "fail to connect" on powerup
- AUX-MADI: Fixed sporadic "fail to sync to incoming data" after samplerate changes 


V1.1 (2022-03-11)
========================
- Added "concat AUX to AES50 Port A" mode  (DIP 2)
- fixed sporadic fail to lock on FlexLink clock source


V1.0 (2021-11-26)
=======================
- Initial release