==============================================================
FLX-DANTE Firmware Version History
==============================================================

V2.5 (2024-07-09)
=================
- [AUX-ADAT][AUX-AES3]: Removed alien receive channels caused by crosstalk


V2.4 (2024-06-03)
=================
- Improved clock init/lock behaviour


V2.3 (2024-05-11)
=================
- Added remote control via webbrowser/USB.  No software required, just 
  connect Flexiverter via USB and open www.appsys.ch/remote
- Added support for AUX-TDM card
- Added option: with DIP1=down, the Dante module's clock configuration can 
  be set externally using Dante Controller. The same configuration option 
  for the AUX-DANTE card is on DIP4=down.
- Fixed certain combinations of FLX and AUX only passing uni-directional audio    
- Fixed AUX-ADAT indicator showing "green" even with no signal
- Added support for AUX Testboard


V2.2 (2024-03-08)
=================
- Fixed AUX-MADI-* cards sometimes not starting up properly


V2.1 (2024-01-25)
=================
- Remote control parameters changed to 115200,8N1; fixed JSON output
- Auto-selection of clock input line on AUX-AES3/AUX-ADAT
- Support for AUX-ADAT-64 card
- Fixed clock source "Internal" not locking after power up
- Fixed AUX-DANTE not booting under certain conditions
- Support for new UBGA484 boards


V2.0a (2023-02-10, internal version number 2.0 unchanged)
=================
- Added support for Dante Brooklyn 3 boards
- Fixed Dante LEDs blinking during "version indication"


V2.0 (2023-01-13)
=================
- Remote control via command line over USB (serial port, 57600 8N1)
- FlexLink: Fixed link negotiation with FLX devices running on own clock


V1.3 (2022-09-07)
=================
- FlexLink connection fixes
- Improved reception of jittery ADAT/AES3 streams from AUX cards


V1.2 (2022-06-15)
=================
- Reduced LED brightness for better readability
- FlexLink: Fixed sporadic "fail to connect" on powerup
- AUX-MADI: Fixed sporadic "fail to sync to incoming data" after samplerate changes 


V1.1 (2022-03-11)
========================
- fixed sporadic fail to lock on FlexLink clock source


V1.0 (2021-11-26)
=======================
- Initial release